TurnAid has been developed with the aim of optimizing the situation around care, turning and repositioning of severely disabled persons in hospitals, institutions and in own homes.
TurnAid is an aid designed for mounting on care beds. It combines two known functions in terms of respectively bed rails and electric turning system.
TurnAid is also suitable for persons at risk of getting pressure ulcers, as the design of the system a repositioning in the sheet with reduced friction and shear between the patient and the sheet.
TurnAid can handle persons with a body weight of up to 350 kg and performs the task with reduced strain for both patients and caregivers.
TurnAid is easily fitted onto most types of care beds, with universal brackets as well as variable length and width adjustments so that the combined solution meets the strict requirements of medical directives in these aspects.
TurnAid comes with the following:
- 1 set of bed rails with electric turning system (right and left)
- 1 mounting bracket with following electrical parts: 1 control box, 1 hand control and various motor cables
- 1 slide sheet
- 1 pull sheet
|Total weight of the system||46 kg|
|Length of system||190 cm|
|Height of system||57 cm|
|User weight min/max||40-350 kg|
|Noise level||<70db (A)|
|Connection voltage||100-200 V - 50/60 Hz|
|Classification Rule||Class I, Rule 4, according to Chapter III Annex VIII - MDR 2017 / 745|
|IP Class||IPXO = not water resistant and unsuitable for outdoor use|
|CE Compliance||MDR 2017 / 745, 2006 / 42 EU og 2004 / 30 / EU|
|Approval standards||IEC 60601-1:2006 - EN 60601-2-52:2010 - EN 60601-1-2:2015|